Rancho RS7000MT RS7328 Shock Absorber
Specifically engineered for high center of gravity light trucks and SUV's to provide the handling, control and performance expected from Rancho RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit's internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho RS7000MT Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.
- 1.97-in. (50mm) body diameter
- 46mm bore monotube construction, ideal for larger light trucks, SUVs and more
- Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube
- Delivers both performance and appearance
- Quicker damping response time
- Monotube design with high pressure nitrogen gas charge
- Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
- Added protection for the shock rod and oil seal
- Black natural rubber bushings enhance durability and reduce road harshness
- Premium long lasting finish
Information:
Highly Engineered; Exceptional Response To Overheating; Delivers Fast Precise Response; Hi-Pressure Gas Charge Separated From Internal Oil; Maximizes Dampening Efficiency And Control; Extra Long Life Due To Brushing/Zinc Plating Body
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| Adjustable |
No |
| Adjustable Length |
No |
| ASIN |
B005V16R1O |
| California Proposition 65 |
No |
| Collapsed Length |
15.160 in. |
| Collapsed Length (in.) |
15.160 |
| Compressed Bumper Stop |
No |
| Compressed Length |
15.16 |
| Country of Origin (Primary) |
CA |
| Dust Shield |
Yes |
| Dust Shield Included |
Yes |
| Emission Code |
Legal US |
| Extended Bumper Stop |
No |
| Extended Hydraulic Lockout |
No |
| Extended Length |
24.01 |
| Extended Length (in.) |
24.010 in. |
| Finish |
Painted |
| Fully Open Length |
24.010 in. |
| Harmonized Tariff Code (Schedule B) |
8708801600 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Discontinued |
| Lower Mount Type |
Loop Bushing & Sleeve Mount - 1/2" Sleeve ID X 1.1/2" Sleeve OAL |
| Lower Mounting Code |
Loop Bushing & Sleeve Mount - 0.500 in. Sleeve ID |
| Lower Mounting Description |
Loop Bushing & Sleeve Mount - 1/2 Sleeve ID X 1.1/2 Sleeve OAL |
| Max Year Covered |
2018 |
| Min Year Covered |
2007 |
| Most Popular Make / Model |
Jeep Wrangler |
| Most Popular Make/Model |
Jeep Wrangler |
| Most Popular Year |
2015 |
| NAFTA Preference Criterion Code |
B |
| Parts Pack(s) |
None |
| Product Grade |
Premium |
| SDR Required Flag |
N |
| SDS Sheet Number |
01164; 01165 |
| Shock Stroke |
8.850 in. |
| Shock Stroke (in.) |
8.850 |
| Total Part VIO |
1828976 |
| Travel Length |
8.85 |
| Upper Mount Type |
Cross Pin Mount - Open Ended, 3/8" Hole ID (Both Ends) X 3.3/16" Pin Length (Hole Center to Center) |
| Upper Mounting Code |
Cross Pin Mount - Open Ended 0.375 in. Hole ID (Bo |
| Upper Mounting Description |
Cross Pin Mount - Open Ended; 3/8 Hole ID (Both Ends) x 3.3/16 Pin Length (Hole Center to Center) |
| GTIN |
00039703003162 |
